Displaying items by tag: Germany

France: Saint-Gobain says that its overall group activity fell to 60% of 2019 levels in April 2020 due to the effects of the coronavirus pandemic. Since then its level of activity surpassed 80% ‘at comparable working days, with large variations by market and country,’ according to Regulatory News Service. The group expects a ‘challenging’ second quarter 2020 before a recovery in the second half of the year. It continues to preserve cash and reduce costs.

In Europe the group reported that, by the end of May 2020, Nordic countries had almost reached 2019 levels. Germany and Eastern Europe were still seeing activity levels below those of 2019. The UK has seen activity levels progress by around 10%/week since a low point in mid-April 2020 when activity were at a ‘virtual standstill’, reaching around 70% of 2019 levels in the last week of May 2020.

In the group’s Middle East & Africa region activity levels surpassed 50% of 2019 levels since a low in mid-April 2020. In France, activity in distribution came close to the 2019 level in the last week of May 2020, but with big differences by region and brand. Spain and Italy are picking up gradually, but remain below the average level of the region. The Netherlands remains close to a normal level of activity, while the Middle East and Africa remain impacted to varying degrees.

North America has reported a ‘contrasting situation state by state,’ but has shown improvement since the low point of mid-April 2020. Activity in May 2020 moved closer to 2019 levels due to ‘significant’ volumes in exterior solutions and a rebound in gypsum volumes. In Latin America, despite the health situation remaining difficult, activity is picking up week after week, from 40% in mid-April 2020 to around 80% in May 2020 with a ramp-up in Brazil.

In Asia-Pacific sales have now reached 2019 levels following the gradual restart of all its production sites in China in March 2020. India remains ‘severely’ disrupted with the restart dependent on the relaxing of confinement measures. The situation is varied across South-East Asia with a rebound in Vietnam where activity has surpassed 2019 levels, but disruptions still relatively significant in Thailand and neighbouring countries.

Australia: Knauf is reportedly looking for buyers for its business in Australia. The Royal Bank of Canada and PricewaterhouseCoopers have been helping the gypsum wallboard producer manage a potential sale, according to the Australian newspaper. The German company operates three wallboard plants in the country. They are thought to be worth up to US$200m.

Any such sale is likely to be related to Knauf’s acquisition of USG in 2019. The US-based company owns a 50% share in USG-Boral, which also operates wallboard plants in Australia. Boral said in April 2020 that it thought it unlikely that the Australian Competition and Consumer Commission (ACCC) would approve its plans for USG-Boral so far. If Knauf were able to sell its other assets in Australia then its options with USG-Boral are more likely to be accepted. Speculation has mounted in the local press about partial or full asset divestments by Knauf in Australia since the USG acquisition.

Germany: Jürgens Maschinenbau has won first place in Kauf’s supplier of excellence awards for 2019. “The entire Jürgens team looks back on a long and successful cooperation with Knauf Engineering. We are particularly proud of this award and look forward to further challenges,” said Jürgens’ chief executive officer (CEO) Albert Andreas. The engineering company supplies supplier of fully-automatic automation and packaging machines for film and non-woven rolled goods.

Australia: Boral has updated the market on its transaction with Knauf in relation to its USG Boral joint venture. On 19 March 2020, Boral announced that its view was that the Australian Competition and Consumer Commission (ACCC) was unlikely to approve the call option in relation to the Australian and New Zealand business. In further discussions between Boral and Knauf, it has now become clear that obtaining the necessary regulatory approvals required to allow the transaction to be implemented as signed in August 2019 is not achievable by the 30 June 2020 deadline. Other conditions to the transaction also remain outstanding.

As a result, Boral and Knauf will consider a range of potential options, with Boral’s objective being to target a cash neutral transaction rather than a transaction with a significant funding requirement for Boral. Discussions are at a preliminary stage and any revised transaction remains subject to agreement between Boral and Knauf, and ultimately will also require the approval of regulators including the ACCC and New Zealand Commerce Commission (NZCC). Given this, the company’s pre-existing US$400m acquisition bridge facility, put in place for the purpose of completing the transaction with Knauf, was allowed to lapse.

Germany: Currax and Siemens have announced their collaboration on a mill operations digitisation pilot project involving the Simotics Connect 400 motor data collector and transmitter. They hope that analysis of data processed via the Simotics 400 will better enable the remote operating of mills ‘to increase efficiency and component life’ and speeding the shift towards automation and production that is resilient to crises such as the coronavirus outbreak.

Uzbekistan: Knauf has announced plans for a second gypsum wallboard production line in Bukhara, Bukhara region. The plans also include an investment of Euro2.2m in an additional gypsum mixture line at its Bukharagips plant, also in Bukhara, which produces dry building mixes. Trend News has reported that Knauf is currently Uzbekistan’s leading producer of gypsum wallboard, which it sells on the Uzbek, Afghan and Turkmen markets.

Australia: Boral has announced that it is ‘considering a range of potential options’ regarding its planned resumption of 100% ownership of USG Boral Plasterboard from Germany-based Knauf in light of the fact that the Australian Competition and Consumer Commission (ACCC) is ‘unlikely to approve the call option in relation to the Australia and New Zealand business.’ The call option would have given Knauf the right to return to 50% ownership of USG Boral Plasterboard within five years. The ACCC’s likely intervention in the transaction is believed to have to do with Boral’s financial situation.

Germany: Logistics visibility provider Sixfold says that Saint-Gobain Rigips will use its Sixfold’s logistics software to enable the firm’s sales teams and planners to provide customers with real-time data on shipments. Customers will be provided with live data on the status of shipments through Sixfold’s product and be able to track the status of goods in transit without calls to carriers, with the potential to gain savings of up to 30%.

Saint-Gobain Rigips’ is a joint customer of Sixfold and Transporeon, a major European logistics network. Sixfold is the exclusive shipments visibility provider for the Transporeon network and provides shipment information on over 50,000 shipments each day. The network comprises more than 1200 shippers in the manufacturing and retailing industries.

Germany: Wacker has reported a fall of 16% year-on-year in its earnings before interest, taxes, depreciation and amortisation (EBITDA) to Euro780m in 2019 from Euro 930m in 2018. Wacker Group CEO Rudolf Staudigl said, “Our earnings last year were strongly influenced by non-recurring effects from insurance compensation received and from the impairment charge on fixed assets. We are currently working on a comprehensive program to make Wacker more efficient and capable, and to achieve substantial cost savings.” He indicated that the group would set out specific targets in early-2020.

Indonesia: PT Siam-Indo Gypsum, a joint venture of Wings Group and Thailand’s Siam Cement Group, has ordered a Gebr. Pfeiffer MPS 180 GC vertical mill for grinding, drying, classifying and calcining gypsum at its 20Mm2/yr Bekasi plant in Java. With a total drive power of 210kW, it will mill 40t/h of gypsum to a fineness of 100 µm.